[Fat removal, asymmetry improvement, elasticity UP~!] Power InMode Lifting

Differentiating Factor 1: Honest Treatment, Accurate Energy Delivery – FX & FORMA Standard Dose Treatment

Inmode has a set maximum output for both FX (fat breakdown) and FORMA (collagen lifting), requiring sufficient time and energy to achieve desired effects.

For FX, we strictly ensure a device time of 6 minutes or more, and for FORMA, a device energy value of 10K or more during treatment.

Instead of self-timers that inject less energy than actual, Kkeut Clinic prides itself on honesty.

At Kkeut Clinic, medical professionals thoroughly perform treatments directly, ensuring safe and effective procedures. There have been instances at other clinics where non-medical staff performed treatments, which led to issues.

Differentiating Factor 2: FX's Effectiveness Increases Above a Certain Temperature – Our Know-how for Rapid Temperature Increase

For FX, the effect increases when the temperature rises above a certain level to break down fat.

Kkeut Clinic, to quickly raise and maintain the temperature without pain,

precisely controls 'output, suction pressure, speed, sequence, and skin reaction' during treatment.

-We use maximum output. Faster temperature rise with stronger energy supply.

-We apply longer pulse durations. By increasing the radiofrequency injection time per session, the energy delivery time from the tip becomes longer, leading to a faster temperature rise.

-We check the temperature with the back of our hand. In addition to Inmode's real-time temperature check, we also check the temperature of the treatment area on our customers' skin with the back of our hand during the procedure to minimize pain.

-We adjust the speed of movement per area. Initially, we apply heat evenly across the entire skin, then concentrate on areas of concern or areas with more fat to raise the temperature, achieving both pain reduction and treatment effectiveness, thereby promising effective results.

Differentiating Factor 3: Treatment After Thorough Design – Delicate Adjustment Without Cheek Hollowing

Since FX is a fat-removal treatment, careful design is essential.

Indiscriminate treatment can lead to cheek hollowing, so we thoroughly design the treatment area with the director to improve asymmetry and address areas of concern before proceeding.

Considering individual face shape and fat volume, we provide natural and ideal results.

Differentiating Factor 4: Swelling Care – Rapid Recovery with Dangguisusan Prescription

Swelling and bruising may occur after Inmode treatment.

At Kkeut Clinic, we provide the renowned traditional Korean herbal medicine 'Dangguisusan,' which alleviates swelling and bruising, at no additional cost to aid in rapid recovery.

You can return to your daily life faster, without worrying about swelling.

Differentiating Factor 5: Verification of Standard Dose After Treatment – Transparent Procedure

After the treatment, we directly show patients whether the treatment time was accurate and if the energy was delivered in the correct amount. We guarantee precise treatment and reliable results.

The Inmode at Kkeut Clinic

*Radiofrequency (RF) lifting is broadly divided into two methods.

1. Monopolar

This method sends energy from one electrode and recovers it through a pad attached to the body,

reaching deep tissues for a strong deep-heating effect, but it may cause some irritation.

2. Bipolar

Since energy circulates between two electrodes, it concentrates on the skin surface and dermis layer.

It causes less pain and is safer, but it is relatively difficult to reach deeper layers (fat layer).

*Inmode FX: Why does it work on the fat layer despite being bipolar?

As mentioned above, if it's bipolar, it's difficult for energy to reach the fat layer.

However, Inmode FX has a structure that allows it to act on the fat layer despite being a bipolar method.

The reason lies in its vacuum suction function.

By gently sucking up the skin, it positions the skin and subcutaneous fat layer between the electrodes,

and then delivers radiofrequency in that state, allowing heat to penetrate deep layers despite being a bipolar method.

When treated with this method, fat cells are damaged at a temperature of around 42-45 degrees Celsius,

and are expelled through the lymphatic system. Simultaneously, collagen production is stimulated in the dermis layer,

allowing for simultaneous fat reduction + elasticity improvement.

*Effects of InMode FX

1. Fat Reduction Effect

When a consistent heat (42~45 degrees Celsius or higher) is maintained for at least 6 minutes, the cell membranes of fat cells are damaged by the heat,

and their contents are released and naturally excreted through the lymphatic system.

As its purpose is fat reduction, it is suitable for areas with abundant fat, such as the cheeks or double chin.

2. Collagen Regeneration Effect

Simultaneously with fat reduction, thermal stimulation in the dermal layer activates fibroblasts, leading to the creation of new collagen,

while existing collagen contracts, resulting in an immediate lifting effect.

*Effects of InMode Forma

FORMA is a radiofrequency treatment focused on the dermal layer, which is shallower than the fat layer.

It gently moves the device along the skin surface, delivering heat at 42~43 degrees Celsius,

and at this temperature, fibroblasts are stimulated, improving fine lines, pores, and loss of elasticity.

A key advantage of FORMA is its real-time temperature feedback system, which ensures stable temperature maintenance throughout the treatment.

This means it promotes collagen production with consistent heat without overheating the skin.

Immediately after the treatment, you may feel your skin tightening, and collagen regeneration will occur over the following 2-6 weeks.

*Which areas are best treated with FX and FORMA?

Sagging or fat issues in each area can have various causes.

-Double Chin

A double chin typically occurs due to excessive accumulation of subcutaneous fat or weakening of the muscles under the chin.

FX targets the fat layer in this area, delivering radiofrequency heat to break down fat cells, and tightens the skin under the chin through collagen regeneration.

FORMA is beneficial when used as an auxiliary treatment for thin skin with significant loss of elasticity.

-Cheek Fat Below the Cheekbones (Jowls)

This is a classic mid-face aging phenomenon where cheek fat sags downward with age. By reducing unnecessary fat with FX,

and reinforcing elasticity with FORMA, a more lifted facial contour can be achieved.

-Cheeks/Side Cheeks

Enlarged pores, fine lines, and rough skin texture are phenomena caused by a decrease in collagen density in the dermal layer.

FORMA stimulates fibroblasts with thermal energy to induce collagen and elastin production, restoring skin surface density and texture.

-Jawline

A collapsing jawline is often due to loss of skin elasticity rather than fat. In such cases, FORMA targets the dermal layer to induce collagen contraction and regeneration,

and if necessary, FX can be combined to sharpen the contour.

-Eye Area, Forehead, Mouth Area

These are areas prone to fine lines, with thin and sensitive skin.

FORMA can achieve sufficient effects even with low output, making it suitable for these sensitive areas.

*GGeut Oriental Medicine Clinic's InMode

The quality of InMode treatment is not guaranteed simply by 'owning the machine'.

What's important is the handpiece combination, heat delivery depth, cumulative energy, and customization tailored to the skin condition.

For example, in the case of FORMA,

collagen is not generated simply by applying warm heat.

In reality, a temperature of 42~43 degrees Celsius must be maintained in the dermal layer for at least 10 minutes,

and a cumulative energy of 8~12kJ or more per area must be accumulated for fibroblasts to be stimulated and produce collagen.

Similarly for FX, rather than simple RF application, a combination of vacuum suction and heat is used.

Deep heat exceeding 42 degrees Celsius for more than 6 minutes must be delivered to achieve simultaneous fat breakdown and collagen contraction.

More than 8-15kJ of energy must be delivered depending on the area, and for areas with thin skin or those prone to bruising, the vacuum pressure must also be adjusted.

Furthermore, it is much more effective to first target fat with FX and then finish with FORMA for lifting.

This is because it helps control any remaining swelling and heat reaction on the skin while simultaneously refining the lifting lines.

In conclusion,

You must remember that InMode treatment should not be chosen based solely on the machine, but rather the practitioner's anatomical understanding, ability to operate settings, and customized design skills are key.

Kkeuthan Clinic adheres to the above principles, performing treatments and continuously researching for optimal lifting.

Even for the same InMode treatment, we will reward our customers with a subtly different InMode experience.

Treatment Guide

Step 1 FX: Total face lifting from the epidermis to the SMAS layer through electrical stimulation combining high-energy radiofrequency and IRE technology, improving facial contour lines by reducing unwanted fat and regenerating collagen.

Step 2 FORMA: Delivers powerful thermal energy to the dermis layer to promote collagen production, improve wrinkles, and enhance elasticity.

Entire process performed by medical professionals

Treatment Benefits

• 01. Improved skin elasticity/natural volume and tightening
• 02. Lifting treatment that reduces unwanted fat
• 03. V-line improvement through collagen regeneration/tightening effect
• 04. Heat delivery of 40-43°C to easily open holes in fat cell membranes
• 05. Double chin/sagging cheek improvement lifting
• 06. Collagen, elastin, hyaluronic acid production
• 07. Synergy effect UP when combined with Shurink treatment

Treatment Procedure

• STEP 01. Self-cleansing
• STEP 02. Step 1 (FORMA Dermal Lifting Management)
• STEP 03. Step 2 (MiniFX HVP Energy Treatment)

Recommended for

• 01. Those who desire effective results for skin aging/facial line management
• 02. Those concerned about a double chin and sagging cheeks
• 03. Those who desire a strong double chin effect/improvement in sagging skin
• 04. Those who desire improved skin elasticity and lifting